Bt redcare gsm manual

and Operation Manual Redcare Secure. Table of Contents 1 Introduction 2 The Redcare Secure unit is a multi-function security communicator from BT Redcare. It combines: Alarm panel dial capture unit (SIA, ContactID, FastFormat) male MMCX flying lead is used to terminate the antenna on the Redcare Secure unit GSM module. Redcare GSM enhances the secure Redcare service by adding a second independant connection via the GSM mobile network. And Redcare GSM now uses a “Roaming SIM”, so if the network it is using goes down for any reason, the system can lock onto another available mobile network. This means the customer premises is linked to the Alarm receiving Centre at all times via two completely separate . and Operation Manual (for Intruder and fire use) Secure Mk3 GPRS and 3G LPS Issue 3 Cert No. c Cert No. d. Table of Contents Introduction 3 Mounting And Wiring 5 The BT Redcare secure Mk3 unit is a dual path alarm signalling unit for transmitting alarm signals from a customer’s alarm.

via the BT Redcare network, to an Alarm receiving Centre (ARC). Essential Extra units have dual modems with 4G/2G mobile technology in each path. The units are designed for use in both Security and Fire systems. The unit communicates via the BT Redcare Network and a valid TA account must exist for the unit to communicate. The unit supports all BT Redcare enabled SIM types. (BT Redcare O2 / BT Redcare BT mobile / BT Redcare Roaming). The SIM type is auto detected by the unit without need for any configuration change. Mounting The unit should be mounted inside the alarm panel, or inside a separate powered housing, using the sticky mounting pads supplied. This manual contains information on the Redcare 5G GSM STU. It contains more detailed information It contains more detailed information than that provided in the Quick start user guide provided with the GSM STU.

Crosby Intruder Alarms provide downloads including security user manuals and BT Redcare Secure · Redcare Classic · BT Redcare Fire · RedCare GSM. BT Redcare Fire alarm signalling is connected to a remote alarm BT Redcare GSM dual signalling paths – this uses two alarm. Note: For mounting GSM module inside a metal enclosure, refer to the instructions supplied with the box. Figure Placing the GSM module and antenna.